group 3 type 70004 farm tractor pto drive hydraulic gearbox for hydraulic gear pump

Introduction of group 3 type 70004 farm tractor pto drive hydraulic gearbox for hydraulic gear pump

group 3 type 70004 farm tractor pto drive hydraulic gearbox for hydraulic gear pump, or gearbox, is an important part of a mechanical transmission system, mainly used to change the speed and torque between the engine output shaft and the drive wheels. It realizes the selection of different ratios through the meshing of a series of gears to adjust the speed and strength of the power transmission.group 3 type 70004 farm tractor pto drive hydraulic gearbox for hydraulic gear pump is not only used in automobiles but is also very common in industrial equipment, agricultural machinery, construction machinery, and other applications that require the adjustment of speed and torque.

Features and benefits of group 3 type 70004 farm tractor pto drive hydraulic gearbox for hydraulic gear pump

Multi-stage gearing: Multiple gear options are available, allowing speed and torque to be optimized based on load conditions.

Increased Efficiency: Proper gear ratios maximize engine efficiency and reduce fuel consumption.

Enhanced Performance: Provides optimal power output under different operating conditions, improving the overall performance of the equipment.

Protect the engine: Reduce the burden on the engine by adjusting the gear ratio to avoid overloading.

Smooth operation: Using synchronizers and other technologies to ensure smooth gear shifting and reduce shock and noise.

Durability: High-quality materials and precision manufacturing processes ensure a long service life.

(group 3 type 70004 farm tractor pto drive hydraulic gearbox for hydraulic gear pump)

Specification of group 3 type 70004 farm tractor pto drive hydraulic gearbox for hydraulic gear pump

This Team 3 Type 70004 hydraulic gearbox is constructed for ranch tractor PTO drives. It connects straight to your tractor’s PTO shaft. Its job is to power hydraulic gear pumps successfully. This system is an usual option for requiring ranch implements needing dependable hydraulic flow.

The gearbox has a standard Team 3 placing pattern. This makes setup straightforward. It fits right onto numerous hydraulic gear pumps. The input shaft is 1-3/8 inch with 6 splines. This matches the typical SAE “B” PTO output discovered on the majority of tractors. The output shaft is likewise 1-3/8 inch with 6 splines. This connects straight to the hydraulic pump input.

It runs at a 1:1 gear ratio. This implies the outcome shaft spins at the very same rate as the tractor’s PTO input. Standard PTO rate is 540 RPM. So, the transmission delivers 540 RPM to your hydraulic pump. This provides constant power transfer. The real estate is cast iron. This guarantees toughness under hard working conditions. The gearbox makes use of top quality bearings and equipments. These components are created for long service life.

The gearbox takes care of continual task applications. It takes care of optimal input accelerate to 1000 RPM. Peak periodic input torque is ranked at 250 lb-ft. The optimal pressure score for the hydraulic system it drives is 3000 PSI. The system includes SAE “O” ring ports. These ports are for case drain connections. Correct situation drainpipe configuration is crucial for pump durability. Normal lubrication is essential. Usage high quality equipment oil meeting API GL-5 specifications. Constantly inspect oil levels before procedure. This transmission supplies a reliable link between your tractor and hydraulic implements. It provides the power required for loaders, lifts, and various other hydraulic equipment.

(group 3 type 70004 farm tractor pto drive hydraulic gearbox for hydraulic gear pump)

Applications of group 3 type 70004 farm tractor pto drive hydraulic gearbox for hydraulic gear pump

This transmission hooks right approximately your tractor’s PTO shaft. Its work is straightforward. It takes the spinning power from the tractor. Then it sends that power to a hydraulic equipment pump. This pump makes hydraulic oil circulation under pressure. That pressurized oil runs various other makers. This setup prevails on several ranches.

Farmers use this transmission a lot for water pumps. Required to relocate water for crops or pets? This powers the pump. It moves water from ponds, wells, or tanks. It benefits irrigation systems too. Getting water to fields is important.

Feeding livestock requires hydraulic power. This gearbox runs the pumps on feed mixers. It powers feed conveyors likewise. Obtaining feed mixed right and moved fast saves time. Animals obtain fed on schedule.

Managing manure is unpleasant work. This PTO gearbox drives pumps on manure spreaders. The pump pushes manure out evenly. It aids handle waste efficiently. Keeping barns clean issues.

Think about hay season. Balers frequently need hydraulic power. This transmission can run the pump managing the bale chamber. It helps tie bales tight. Relocating bales requires hydraulics also.

Grain handling gets much easier. Grain augers require lifting and moving. Hydraulic cylinders do this. The pump powered by this gearbox runs those cyndrical tubes. Filling vehicles or filling bins happens much faster.

Various other jobs require hydraulics. Log splitters utilize it to push wood through the blade. Blog post hole diggers need it to elevate and lower the auger. Some snow blowers make use of hydraulics for chute direction. This transmission powers those pumps dependably.

The design is tough. It deals with the consistent vibration and hefty lots on a farm. Farmers trust fund it. It attaches conveniently. You obtain hydraulic power any place the tractor goes. This makes many work feasible. It conserves labor. It enhances efficiency. This gearbox is a crucial part of making farm equipment job.

Company Introduction

Established in 2009, Gearbox Solutions Machinery Co.,ltd. focus on metal research and mining machinery spare parts. 2 factories over an area of 13,300 square meters, based on 100+ sets of equipment, our production capacity reaches 12000 Tons/Year. has passed ISO 9001 quality managment system certification in 2008.

Our mainly products are dragline excavator spare parts,rotary kiln spare parts, large modulus gear (gear shaft), gearbox ect. 40+ patents with over 45 years experience to help focus on improve the service life of spare parts. We belive that more than 80% reason of mechanical parts’ working life depends on hot processing (steel making/forging/casting/welding/heat treatment). Eight material engineers will control the quality from the original resource.

If you are interested, please feel free to contact us.

5 FAQs of group 3 type 70004 farm tractor pto drive hydraulic gearbox for hydraulic gear pump

Here are 5 FAQs for the Group 3 Type 70004 Farm Tractor PTO Drive Hydraulic Gearbox:

What is this gearbox for? This gearbox connects directly to your tractor’s PTO shaft. It takes the PTO rotation and drives a hydraulic gear pump. The pump then creates hydraulic power. You use this hydraulic power to operate various implements needing high flow, like loaders or large log splitters.

Which tractors fit this gearbox? This gearbox fits tractors with a standard 1-3/8″ diameter, 6-spline PTO shaft. It’s a Group 3 size unit. Check your tractor’s PTO horsepower rating. Ensure it matches the gearbox’s rated input capacity. The gearbox needs enough tractor power to drive the hydraulic pump effectively.

How do I install this gearbox? Mount the gearbox securely to your implement frame using the provided bolt holes. Align the gearbox input shaft perfectly with your tractor’s PTO shaft. Connect the PTO shaft between them. Use the correct guards. Connect the gearbox output shaft directly to your hydraulic pump’s input shaft. Use proper couplings. Fill the gearbox with the recommended oil type and amount before starting.

What maintenance is needed? Check the gearbox oil level regularly. Look for leaks around seals. Change the oil after the first 50 hours of operation. Change the oil every 250 hours or once a year after that. Use the oil type specified in the manual. Inspect mounting bolts and shaft connections for tightness periodically. Listen for unusual noises during operation.

Are there important safety warnings? Yes. Always shut off the tractor engine before connecting or disconnecting the PTO shaft. Make sure the PTO is disengaged. Keep clear of rotating shafts and couplings. Hydraulic systems build extreme pressure. Never service the system under pressure. Release all pressure safely first. Wear appropriate safety gear. Follow all standard tractor and hydraulic safety procedures.

(group 3 type 70004 farm tractor pto drive hydraulic gearbox for hydraulic gear pump)