Gearbox 02Z STUB SHAFT “SHORTER EDITION” — 50 X 130 Shaft FOR VOLKSWAGEN 02Z409345B/02N409345

Introduction of Gearbox 02Z STUB SHAFT “SHORTER EDITION” — 50 X 130 Shaft FOR VOLKSWAGEN 02Z409345B/02N409345

Gearbox 02Z STUB SHAFT “SHORTER EDITION” — 50 X 130 Shaft FOR VOLKSWAGEN 02Z409345B/02N409345, or gearbox, is an important part of a mechanical transmission system, mainly used to change the speed and torque between the engine output shaft and the drive wheels. It realizes the selection of different ratios through the meshing of a series of gears to adjust the speed and strength of the power transmission.Gearbox 02Z STUB SHAFT “SHORTER EDITION” — 50 X 130 Shaft FOR VOLKSWAGEN 02Z409345B/02N409345 is not only used in automobiles but is also very common in industrial equipment, agricultural machinery, construction machinery, and other applications that require the adjustment of speed and torque.

Features and benefits of Gearbox 02Z STUB SHAFT “SHORTER EDITION” — 50 X 130 Shaft FOR VOLKSWAGEN 02Z409345B/02N409345

Multi-stage gearing: Multiple gear options are available, allowing speed and torque to be optimized based on load conditions.

Increased Efficiency: Proper gear ratios maximize engine efficiency and reduce fuel consumption.

Enhanced Performance: Provides optimal power output under different operating conditions, improving the overall performance of the equipment.

Protect the engine: Reduce the burden on the engine by adjusting the gear ratio to avoid overloading.

Smooth operation: Using synchronizers and other technologies to ensure smooth gear shifting and reduce shock and noise.

Durability: High-quality materials and precision manufacturing processes ensure a long service life.

Specification of Gearbox 02Z STUB SHAFT “SHORTER EDITION” — 50 X 130 Shaft FOR VOLKSWAGEN 02Z409345B/02N409345

Transmission 02Z Stub Shaft– Shorter Edition

Specific Suitable For Volkswagen Gearboxes

This is a much shorter stub shaft produced Volkswagen hand-operated gearboxes. It matches part numbers 02Z 409 345 B and 02N 409 345 . The shaft determines 50 mm in diameter and 130 mm in size . It is built to exact factory specifications so it fits right the very first time.

Solid, reputable efficiency comes from state-of-the-art steel. The material stands up to wear and takes care of hefty loads without bending or breaking. Every shaft undergoes stringent top quality checks. This ensures smooth operation inside your gearbox.

Why Choose This Stub Shaft?

Lots of restored transmissions require this precise shaft. Using the wrong component creates noise, shifting trouble, or very early failure. Our version offers you the correct size and spline count . That means gears fit together properly and move smoothly.

This stub shaft deals with usual VW models that make use of the 02Z or 02N transmission. It matches daily drivers and efficiency constructs alike. You obtain OEM-level feature without paying dealer rates.

Easy to set up when you’re rebuilding a transmission. Just line it up, slide it in, and secure it based on service instructions. No extra machining or suitable required. It decreases in like the initial.

We make this part for individuals that want their fixing done right. No guesswork. No economical substitutes. Just a solid element that does its work every single time you drive. Maintain your gearbox running clean and silent with a part made to last.

Applications of Gearbox 02Z STUB SHAFT “SHORTER EDITION” — 50 X 130 Shaft FOR VOLKSWAGEN 02Z409345B/02N409345

Applications of Transmission 02Z STUB SHAFT “Much Shorter Edition”– 50 x 130 Shaft

Developed for Particular Volkswagen Transmissions

This stub shaft fits directly into Volkswagen manual gearboxes that make use of component numbers 02Z 409 345 B and 02N 409 345. It is built to match the original devices in dimension, form, and feature. The shaft measures 50 mm in size and 130 mm in size, making it the correct “shorter version” for sure transmission setups.

Dependable Performance in Daily Driving

The stub shaft plays an essential duty inside the transmission. It assists transfer engine power smoothly via the gears. A used or damaged shaft can trigger moving issues, sound, or perhaps total gearbox failure. This replacement component guarantees your transmission works as it should. It is made from solid steel and finished to tight resistances. That means it lasts long and runs quietly under normal driving conditions.

Fits Usual VW Designs

You will locate this part utilized in several Volkswagen vehicles with 5-speed or 6-speed hand-operated transmissions. It matches models like the Golf, Jetta, Passat, and others developed in between the late 1990s and mid-2000s. Always examine your vehicle’s transmission code before getting. Not all 02Z or 02N gearboxes require the shorter version– some call for a longer shaft. Utilizing the incorrect one may cause poor fit or damages.

Developed for Easy Installation

This stub shaft drops right into location throughout a gearbox rebuild or fix. It lines up with the mainshaft and various other inner parts without added fitting. Mechanics value its precise measurements and tidy surface. No grinding or filing is needed. Just install it with requirement tools and proper lubrication.

Keep in mind: Constantly replace seals and bearings when installing a new stub shaft. This maintains the entire system working well and avoids early wear.

Company Introduction

Established in 2009, Gearbox Solutions Machinery Co.,ltd. focus on metal research and mining machinery spare parts. 2 factories over an area of 13,300 square meters, based on 100+ sets of equipment, our production capacity reaches 12000 Tons/Year. has passed ISO 9001 quality managment system certification in 2008.

Our mainly products are dragline excavator spare parts,rotary kiln spare parts, large modulus gear (gear shaft), gearbox ect. 40+ patents with over 45 years experience to help focus on improve the service life of spare parts. We belive that more than 80% reason of mechanical parts’ working life depends on hot processing (steel making/forging/casting/welding/heat treatment). Eight material engineers will control the quality from the original resource.

If you are interested, please feel free to contact us.

5 FAQs of Gearbox 02Z STUB SHAFT “SHORTER EDITION” — 50 X 130 Shaft FOR VOLKSWAGEN 02Z409345B/02N409345

Frequently Asked Questions: Gearbox 02Z STUB SHAFT “Shorter Edition” – 50 x 130 mm for Volkswagen 02Z409345B / 02N409345

What vehicles does this stub shaft fit?

This shorter stub shaft fits select Volkswagen models that use the 02Z or 02N manual transmissions. It matches part numbers 02Z409345B and 02N409345. Always check your vehicle’s VIN or original part number before ordering to confirm compatibility.

Why choose the “shorter edition” version?

Some gearbox builds or rebuilds need a stub shaft with reduced length. This version is made for those specific setups. It keeps everything aligned right and works just like the original when used in the correct application.

What are the exact dimensions?

The shaft measures 50 mm in diameter and 130 mm in total length. These specs match OEM standards for the shortened variant used in certain 02Z/02N gearboxes.

Is this part new or rebuilt?

This is a brand-new stub shaft. It is not remanufactured or used. Each unit is built to meet factory-level quality so it lasts long and performs well under normal driving conditions.

Do I need special tools to install it?

Standard transmission service tools are enough for installation. You will need a torque wrench, snap-ring pliers, and basic hand tools. Follow the factory repair manual for your specific VW model to avoid mistakes. Never force the shaft into place—if it does not slide in smoothly, double-check alignment and surrounding components.