Original 485078-04 PUNCH VT2 CVT Transmission Gearbox Parts TCU Control Module Computer Board For GEELY

Introduction of Original 485078-04 PUNCH VT2 CVT Transmission Gearbox Parts TCU Control Module Computer Board For GEELY

Original 485078-04 PUNCH VT2 CVT Transmission Gearbox Parts TCU Control Module Computer Board For GEELY, or gearbox, is an important part of a mechanical transmission system, mainly used to change the speed and torque between the engine output shaft and the drive wheels. It realizes the selection of different ratios through the meshing of a series of gears to adjust the speed and strength of the power transmission.Original 485078-04 PUNCH VT2 CVT Transmission Gearbox Parts TCU Control Module Computer Board For GEELY is not only used in automobiles but is also very common in industrial equipment, agricultural machinery, construction machinery, and other applications that require the adjustment of speed and torque.

Features and benefits of Original 485078-04 PUNCH VT2 CVT Transmission Gearbox Parts TCU Control Module Computer Board For GEELY

Multi-stage gearing: Multiple gear options are available, allowing speed and torque to be optimized based on load conditions.

Increased Efficiency: Proper gear ratios maximize engine efficiency and reduce fuel consumption.

Enhanced Performance: Provides optimal power output under different operating conditions, improving the overall performance of the equipment.

Protect the engine: Reduce the burden on the engine by adjusting the gear ratio to avoid overloading.

Smooth operation: Using synchronizers and other technologies to ensure smooth gear shifting and reduce shock and noise.

Durability: High-quality materials and precision manufacturing processes ensure a long service life.

Specification of Original 485078-04 PUNCH VT2 CVT Transmission Gearbox Parts TCU Control Module Computer Board For GEELY

Original 485078-04 PUNCH VT2 CVT Transmission Gearbox TCU Control Module

Built for GEELY Vehicles

This is the genuine 485078-04 PUNCH VT2 CVT transmission control unit (TCU). It is made for specific GEELY models that use the VT2 continuously variable transmission. The part is an original equipment component, not a copy or aftermarket substitute.

The TCU acts as the brain of your car’s automatic gearbox. It reads signals from sensors and decides when to shift gears. A working TCU gives you smooth acceleration, better fuel economy, and reliable performance. If your current module fails, you may notice delayed shifts, jerking motions, or a warning light on your dashboard.

This exact part number—485078-04—is required for proper fit and function. Installing the wrong TCU can cause serious drivetrain issues or prevent your vehicle from moving at all. Always check your vehicle’s VIN or existing part number before ordering.

The board comes fully programmed and ready to install. No extra coding or calibration is needed in most cases. It matches factory specifications for hardware layout, connector type, and software version. This ensures seamless communication with your car’s main computer system.

We only supply brand-new, unused units sourced directly from authorized channels. Each module is tested for basic functionality before shipping. The packaging protects the sensitive electronics during transit.

If your GEELY shows signs of transmission trouble—like slipping gears, harsh shifting, or limp mode—this TCU could be the fix. Replacing it with the correct original part helps restore your car’s drivability and avoids long-term damage to the gearbox.

Make sure your mechanic confirms the fault lies with the TCU before replacement. Other issues like low fluid or sensor faults can mimic TCU failure. But if the control module is truly at fault, this 485078-04 unit is the right solution for your GEELY VT2 CVT system.

Applications of Original 485078-04 PUNCH VT2 CVT Transmission Gearbox Parts TCU Control Module Computer Board For GEELY

Original 485078-04 PUNCH VT2 CVT Transmission Gearbox Parts – TCU Control Module

Built for GEELY Vehicles

This is the original 485078-04 PUNCH VT2 CVT transmission control unit (TCU) module. It is made for GEELY cars that use the VT2 continuously variable transmission. The part is a direct replacement. It matches factory specs exactly.

The TCU is the brain of your CVT gearbox. It reads signals from sensors. Then it controls gear shifts, clutch pressure, and torque delivery. A working TCU keeps your drive smooth. It also helps protect other transmission parts from damage.

Why choose this original part?
Aftermarket or used modules often cause trouble. They may not talk right to your car’s computer. This original board avoids those issues. It fits without extra coding in most cases. Your GEELY will run like it did when new.

Fits common GEELY models
This TCU works with GEELY vehicles equipped with the PUNCH VT2 CVT. That includes many Emgrand, Vision, and MK series cars from the late 2000s to early 2010s. Always check your VIN or old part number to confirm fitment.

Quality you can trust
Every unit is tested before shipping. It comes ready to install. No programming is needed if your car has not been modified. Just plug it in and go.

If your GEELY shows signs like delayed shifting, jerking, or a stuck gear, the TCU might be the problem. Replacing it with this genuine 485078-04 module can fix those issues fast. You get reliable performance without guesswork.

Company Introduction

Established in 2009, Gearbox Solutions Machinery Co.,ltd. focus on metal research and mining machinery spare parts. 2 factories over an area of 13,300 square meters, based on 100+ sets of equipment, our production capacity reaches 12000 Tons/Year. has passed ISO 9001 quality managment system certification in 2008.

Our mainly products are dragline excavator spare parts,rotary kiln spare parts, large modulus gear (gear shaft), gearbox ect. 40+ patents with over 45 years experience to help focus on improve the service life of spare parts. We belive that more than 80% reason of mechanical parts’ working life depends on hot processing (steel making/forging/casting/welding/heat treatment). Eight material engineers will control the quality from the original resource.

If you are interested, please feel free to contact us.

5 FAQs of Original 485078-04 PUNCH VT2 CVT Transmission Gearbox Parts TCU Control Module Computer Board For GEELY

Frequently Asked Questions: Original 485078-04 PUNCH VT2 CVT TCU Control Module for GEELY

What is the 485078-04 TCU control module?

This is the original transmission control unit (TCU) computer board used in GEELY vehicles with the PUNCH VT2 CVT gearbox. It manages gear shifting, clutch pressure, and other key functions to keep your automatic transmission running smoothly.

Which GEELY models use this part?

The 485078-04 TCU fits several GEELY models equipped with the VT2 continuously variable transmission. Common examples include certain versions of the GEELY Emgrand EC7, GX7, and Vision. Always check your vehicle’s VIN or existing TCU part number to confirm compatibility before buying.

Why replace the TCU control module?

If your car shows symptoms like delayed shifting, jerking during acceleration, stuck gears, or a warning light on the dashboard, the TCU may be faulty. A damaged or outdated control board can cause poor transmission performance. Replacing it with the correct original part often fixes these issues.

Is this a new or used part?

We supply only brand-new, original 485078-04 TCU modules. These are genuine factory parts, not refurbished or cloned units. Each board comes tested and ready to install, ensuring reliable operation right out of the box.

Does the TCU need programming after installation?

Yes. Even though this is an original part, it must be coded or matched to your vehicle’s ECU using proper diagnostic tools. Most modern GEELY cars require this step so the engine and transmission can communicate correctly. We recommend professional installation and setup at a qualified service center.